Bow press

mij

New member
Has anyone used a bowmaster press with a bowtech carbon Icon? I want to fit a peep sight and prefer to do all my own work. The alternative 'L' brackets (the narrower ones) look as if they are not narrow enough. That is they could slip sideways when under pressure. I'd prefer them to be at least an 1/8th of an inch closer together.
jim
 


mij

New member
Has anyone used a bowmaster press with a bowtech carbon Icon? I want to fit a peep sight and prefer to do all my own work. The alternative 'L' brackets (the narrower ones) look as if they are not narrow enough. That is they could slip sideways when under pressure. I'd prefer them to be at least an 1/8th of an inch closer together.
jim
Answering my own post but I suppose nobody has done it. I did it this afternoon by squashing and closing the 'L' brackets a little in a vise, then pressed the bow carefully. It worked very well indeed. Peep sight now fitted.
jim
 


Top