EVC
New member
Hello,
I just received a spool of it and I would like to hear some tips on how to deploy it (FWIW I am used to 8125). As the spool is small, I would like not to waste it with failed attempts if I can. So what I need to know is
1- Number of strands for large (namely g-pin nocks).
2- Length I should make the string as I understand it creeps less than 8125 (I make my 8125 strings 3.5 to 3.75" shorter than the 3" nominal length).
3- Brace height. I read somewhere it must be between 5 and 20mm (the latter seems to be too much).
4- Any other hint that a user of this materil deems relevant.
Thanks in advance.
I just received a spool of it and I would like to hear some tips on how to deploy it (FWIW I am used to 8125). As the spool is small, I would like not to waste it with failed attempts if I can. So what I need to know is
1- Number of strands for large (namely g-pin nocks).
2- Length I should make the string as I understand it creeps less than 8125 (I make my 8125 strings 3.5 to 3.75" shorter than the 3" nominal length).
3- Brace height. I read somewhere it must be between 5 and 20mm (the latter seems to be too much).
4- Any other hint that a user of this materil deems relevant.
Thanks in advance.