Vibration

[Jamie Barrellie-Denning]

Hello guys,

My bow has started to vibrate slightly on release (with a louder "buzz" noise), never had this problem before and with a Worcester round coming up im asking for any ideas of what it could be?

Jamie

 

[lbp121]

Start off checking anything that isn't solid metal. If it screws together it will come undone. If that gets nowhere, take off sight, clicker, stabilisers etc. if the noise is still there, it must be the bow. If not add items until you find it.

 

[PFC1968]

Make sure you check the detent / dovetail pin is tight on both of your limbs too.

 

[KidCurry]

If you have done the above with no results, check your bracing height. A low bracing height can cause vibration.

 

[wingate_52]

Start with a barebow, after checking your tiller and brace height, shoot a few arrows at close range, no sight remember. add one component at a time to determine what is making the noise. Do you have plastic or fibre washers between rods and mounts?

 

[Jamie Barrellie-Denning]

It was the weight on the end of my stabiliser!!!!! :duh:

Thanks guys!!!